Driveshaft

I am missing couple of screws and washers to finish the gearbox.

In the mean time I decided to start planning the next step which is obviously the driveshaft.

First I was thinking to use the original driveshaft from the Revell kit, but it turned out to be impossible. the shaft is actually more like a half of a shaft as you can see from the picture below. Also the joints in both ends are only lookalikes.

So I decided that I will do the driveshaft myself. The shaft itself is almost ready but I still have to make the joints. Here you see couple of pictures how it looks at the moment.

Gearbox

Hi guys!
Corvette project goes forward slowly but steadily.
as yo saw from my previus post I am trying to fit an electric motor inside the V8 housing. i have made some parts now which will tie the electric motor and the axle together.

I have a small CNC router which I used to make these parts. i used two types of plastic. I don't know whar that black plastic actually is but it was very soft to machine. Let's hope that it isn't too soft so that my M1.6 threads won't brake out. the white plastic is POM (polyoxymethylene) plastic which seems to be much more harder but still very well machineable. I have got both of these plastic as left overs from a nearby machining company.

Here are couple of pictures how the engine gearbox combo looks now.

That's all for now. I'll be back again after I make some more progress.